Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Connecting 2 Lucent PBX- DCS with DSP Farm on 7206 with Pa-VCX and PA-MCX

Hi,

We have two Lucent PBXs talking DCS to each other on T1 . We are now trying to connect them across through 7206VXr with the PA- MCX -8T1 card with a Transparent CCS connection . The 7206 Chassis also has a across a PA-VCX the Enhanced port adaptor capable of sharing the DSP resources on them to bring the T1 across PA-MCX-8T1. We want to use the DSP resources on the Enhanced Port Adaptors for the T1 on the MIX adaptors. All the documents that I could find on CCO say this is supported , but none of them have a clear sample configuration on how to do this.

Does anyone have this working? I do have a Cisco Case open and they have a lot of problems to in finding out how to do this...

I already have been to these links:

http://www.cisco.com/warp/partner/synchronicd/cc/so/neso/vvda/avvid/pbxc3_rg.htm

http://www.cisco.com/warp/partner/synchronicd/cc/pd/ifaa/pa/divopa/prodlit/t1e1_ds.htm#xtocid5

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a00800804f4.html#xtocid1684819

http://www.cisco.com/en/US/partner/products/hw/modules/ps2033/prod_brochure09186a008007d45f.html

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a008007fe8b.html#22951

Two-Port T1/E1 High Capacity Digital Voice Port

Adapter Installation and Configuration

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a008007fe8b.html#xtocid26

Please let me know...

Thank you

Ranjani

1 REPLY
Cisco Employee

Re: Connecting 2 Lucent PBX- DCS with DSP Farm on 7206 with Pa-V

Yes, there are several sites doing this.

Have you seen this URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t5/dtmcxpa.htm

?

197
Views
0
Helpful
1
Replies
CreatePlease to create content