I just SIPed the new CP 7970, the process went OK. However, it keep on asking for a .tlv file that is the Security Certificate file which I don't have because I do not have CME. The second file it asks for is SEPMAC.cnf.xml file which I also don't have. Having looked at hundreds of various documents on the web, but couldn't find one that describes what each XML tag means in this file and what are the default settings for it. The phone keeps asking for thsi file from TFTP Server. The Menu SIP Configuration options on the Phone do not allow me to edit any of the settings.
My request to you is; if someone has a working SEPMAC.cnf.xml file for SIP, please do send me or point me in the right direction on how can I get the SIP working on this nice phone.
I did reset the phone a couple of times already. The phone is now directly connected to the Broadband Router port. The router has a DHCP Server and the IP Phone is getting the IP Address from it. Hardware seems to be fine, it's a brand new out of the box 7970G phone set, should I still replace it?
Could you pls send me a sample SEM.ctl.xml file for it?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...