Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM and SRST Lab

Hi,

I'm trying to setup up a very basic lab to show CUCM 8.5 with an SRST 2900 series router.  I don't need an advanced configuration.  Can someone point me to some documentation on how to setup the SRST router?  The router is still in the box.  The only thing I need to use the router for is SRST so I don't need advanced routing.

Thank you.

5 REPLIES

CUCM and SRST Lab

New Member

CUCM and SRST Lab

Thanks Adrian.  This is a good start.  Do you have any information on the router setup?  In other words, do I just follow the initial router setup that is in the 2900 series documentation and then add the SRST config?

2900 Series Installation:

http://www.cisco.com/en/US/docs/routers/access/2900/hardware/installation/guide/Hardware_Installation_Guide.html

Re: CUCM and SRST Lab

Hi,

Yes, do the initial basic setup and then add SRST configuration. Just in case, in order to have VoIP/IPTelephony in ISR G2, your router must be UC technology packaged. More about IOS in ISR G2:http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985.html#wp9000793

Hope it helps.

Regards,

- Adrian.

New Member

CUCM and SRST Lab

Hi Adrian,

Thank you for all the help.  Do you know if there's a way to obtain a non-production UC license?  I saw that I can request a trial license for 60 days - but is there a way to get something more permanent for a lab / testing environment?

Re: CUCM and SRST Lab

Hi,

You should contact Cisco TAC and explain them your needs to see if they can issue you an extension for longer trials.

Support Cisco Worldwide Contacts:

http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html#telephone

Good luck!

Regards,

- Adrian.

1186
Views
3
Helpful
5
Replies