I would recommend Cisco unified presence server for your deployment with MPX. That will give you chat, voice and video conferencing. If you dont use MPX then you can only do point-to-point video CUPS on its own doesnt support video conferencing.
YOu can also intergrate with exchange to view meetings and unity to listen to voicemails.
You can use VTA for the remote clients and 7985 for central site or some sort of tanberg phone if you want a larger screen.
The remote users are going to have to have a pretty low latency connection to get good quality video/voice.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...