Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DMM upgrade to 5.0 web interface issue

For some reason I can not access the web interface since doing the 4.1 to 5.0 upgrade. This worked before I did the upgrade on 4.1 and I can ssh into the appliance using its IP address. The setup in the AAI looks right. When I first try to browse to the ip address using http://<IP_address>:8080 i am asked about the certificate, when I click to coninue to the site I end up at a page can not be found. I am using IE7 and like I said, 4.1 worked just fine. Please help, I am running out of things to try.

4 REPLIES
New Member

Re: DMM upgrade to 5.0 web interface issue

I jsut upgraded as well but did not run into this problem. Have you tries FireFox? It could be a problem with IE7.

New Member

Re: DMM upgrade to 5.0 web interface issue

Make sure forward and reverse DNS is working. Version 5 seems to be much more picky about that.

New Member

Re: DMM upgrade to 5.0 web interface issue

Smae thing with my 4.1 to 5.0 upgrade.

Tryusing FQDN instead of IP Address.

https://fqdn:8443/

New Member

Re: DMM upgrade to 5.0 web interface issue

I had the same issue, make sure you are not just using an IP and you have a FQDN entry in your DNS server for it otherwise it will not work. Also use internet explorer 7 with the latest java version for the best experience. Other browsers seem to have issues displaying properly.

154
Views
0
Helpful
4
Replies