DSP chips on Low desity NM-2V for 3600 series router
I am setting up Voip Lab, I have got 3640 and 1751 router, but I need to buy NM-2V and FXO and FXS cards to make them work in voice lab. could someone please help by answering the following queries regarding NM2V module on 3640 router. I would appreciate if any suggessions to built voice labs for CCVP specially in reagrds to hardware recommendation.
1. Do I need to buy DSPs seperately for 3600 series router or they are already installed on all NM-2V module?
2. Which IOS is suitable to use for 1751 and 3640 routers in lab environment?
3. How much memory Flash and DRAM is required in each router?
Also appreciate if you could ref any documentation or suggesions to get a good start.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...