Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

fast busy using feature access codes (FAC)

  I have my analog phones under the control of CME but when i try to press the **5 to pickup a call I get a fast busy the first time i press the * prefix. Any ideas why this is ? Parts for config below

stcapp ccm-group 1

stcapp security trustpoint SJS253-cme

stcapp security mode encrypted



stcapp feature access-code




stcapp supplementary-services

port 1/0/0

  fallback-dn 3328

port 1/0/1

  fallback-dn 2001

port 1/0/2

  fallback-dn 2002

port 1/0/3

  fallback-dn 2003

port 1/0/4

  fallback-dn 2004

port 1/0/5

  fallback-dn 2999


stcapp call-control mode feature


sccp local GigabitEthernet0/0.100

sccp ccm identifier 1 version 7.0 trustpoint SJS253-cme



sccp ccm group 1

associate ccm 1 priority 1

signaling dscp cs5



secure-signaling trustpoint SJS253-cme

tftp-server-credentials trustpoint SJS253-cme

server-security-mode secure

device-security-mode encrypted

no auto-reg-ephone

authentication credential cisco cisco

max-ephones 58

max-dn 300

ip source-address port 2000

ip qos dscp cs5 signal

service phone garp 0

service phone spanToPCPort 1

service phone webAccess 1

system message Whiting Field

cnf-file location flash:

cnf-file perphone

load 7915-12 B015-1-0-3

load 7915-24 B015-1-0-3

load 7942 SCCP42.8-5-3S

load 7962 SCCP42.8-5-3S

time-zone 8

voicemail 7800

max-conferences 8 gain -6

call-forward pattern ..........


multicast moh port 2000

web admin system name cisco password cisco



transfer-system full-consult

transfer-pattern ....

fac standard

create cnf-files version-stamp Jan 01 2002 00:00:00


  • Video Over IP
Hall of Fame Super Gold

fast busy using feature access codes (FAC)

Alread replied in another thread, please do not post duplicates. You can delete your post using the actions panel on the right.

This widget could not be displayed.