Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FXO ports start in shutdown state

3640 router with 3 NM-2V slots. Each slot has 2 FXO-2 cards. After a reload/reboot, the first port in each FXO comes up in shutdown state. I can then do:

voice-port 1/0/0

shut

no shut

and they are both operational. I will then save the configuration. I verify that the running config and startup config are the same. Reload/reboot and the first port of the pair is again shutdown. The current config shows it as does the startup config!

Has anyone seen this before?

3640 is running 12.4(25a). Call Manager is 4.1.

  • Video Over IP
1 REPLY
New Member

Re: FXO ports start in shutdown state

contact Cisco TAC engineer,

and look at the Bug Toolkit on CCO

if this help, please rate.

194
Views
0
Helpful
1
Replies
This widget could not be displayed.