Gatekeeper does not properly refresh endpoint's avail./current circuits
I am using C3640 with c3640-ix-mz.123-10b as a gatekeeper for several voice gw and ipipgw. All works great but gatekeeper has problem with properly refreshing information about one endpoint (7200VXR working as IPIPGW) current and available circuits. It leads to situation when gk see that endpoint as "out of resources" while this endpoint is almost free.
sh gatekeeper endpoints circuits
GATEKEEPER ENDPOINT REGISTRATION
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
Re: Gatekeeper does not properly refresh endpoint's avail./curre
When registering a VoIP gateway to a Gatekeeper Cluster, calls through the alternate gatekeeper will fail when the primary becomes unavailable due to a hard reset. If a graceful shutdown if executed, calls are processed normally by this secondary gatekeeper.
This problem has been observed on a couple of Cisco 3640's running 12.3(15) and implementing Gatekeeper Clustering functionality (GUP)
There is no workaround. The problem might not be there if we implement HSRP, but this has not been tested.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...