Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Gtekeeper with VTA & Netmeeting

I've set up a fairly simple CCM system with a GK h225 trunk to a local GK. The GK has several local zones only. There are 2 netmeeting PCs registered via the GK. There are 2 VTA devices on CCM.

I can make calls to/from all the devices without problem.

When I make a call in the following scenarios, the B/W on the GK shown using "show gatekeeper call" is as follows:

VTA to NetM = 128k

NetM to VTA = 0k

NetM to NetM = 0k

Voice/video works in all scenarios. My questions are:

Why do some show up as 0k?

I was expecting to see higher than 128k because of the Video element. Why does the B/W not include the video?

All audio calls are G711.

Any ideas? Many thanks, Mark.

1 REPLY
Silver

Re: Gtekeeper with VTA & Netmeeting

Try with the codec g.729.

111
Views
0
Helpful
1
Replies