Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

H.323 endpoints dialling SCCP endpoints

Is it possible to configure an H.323 endpoint/MCU to dial out to SCCP endpoints (e.g. Tandberg Skinny compatible endpoints, Cisco VTA and the Cisco 7895 video phone)?

I can set up a gatekeeper-controlled trunk (and associated route pattern) to allow Skinny endpoints to call H.323 clients using their E.164 addresses.

Could this be achieved using a default technology prefix on the gatekeeper pointing towards the CallManager?

1 REPLY
Silver

Re: H.323 endpoints dialling SCCP endpoints

If you are using H.323 gateway, then get it registered with CallManager and have a trunk between CCM and your gateway. Then you should be able to call between the H.323 endpoints and SCCP endpoints.

287
Views
0
Helpful
1
Replies
CreatePlease login to create content