I'm a new coming in the forum. Recently I have met some problems in the situation below:
A CUCM6.0 Server Add a Gateway RouterA,
Another CUCM6.0 Server Add another Gateway RouterB, RouterA & RouterB interconnected through any networks and Using H.323 Voip Dial-peer.
I have a question here:
Is this a Valid configuration? If it is, for the perspective a routerA, It have two call legs both Voip dial-peer, is it valid? I have tested this scenario, it doesn't work on my network, Is something wrong with me, or I need some special config command.
Are you trying to send a call from your CUCM which is connect to a H.323 gateway on to another Voice Gateway? IF this is what you are trying to then yes this is possible using VOIP dial-peers. Post your config and I'll see if I can help.
Basically though I have a senario where my calls to my gateway and then I have a dial-peer which sends the call to another gateway that is accessible by my gateway and then that call is forward to the remote gateway phone or out the PSTN.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...