Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

H264 support - CCM4.2

Hi, I have a CCM4.2(3)SR2b installation with several Tandberg (H323) and VTA (2.1) endpoints.

VTA to VTA is fine negotiating an H264 codec. Unfortunately the best I can get with the Tanndberg H323 endpoints is H263. I know CCM 4.1.3 introduced H264 support for SCCP endpoints. Does anyone know if there is supposed to be H264 support for H323 endpoints. The Tandberg endpoints are created within CCM as H323 devices. The tandberg endpoints have the IP address of the CallManager server for H225/245, ie they do not use a gatekkeper.

Thanks

I'm having no luck getting H264 working between

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: H264 support - CCM4.2

unfortunately the support for h264 is limited to sccp to sccp calls, there is no support for it with h323

Take a look at the system guide for 4.2(3) here:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e4ea.html

In the Video Codec section, you see:

"The system supports H.264 for calls that use skinny Client Control Protocol (SCCP) on originating and terminating endpoints only."

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
4 REPLIES
Cisco Employee

Re: H264 support - CCM4.2

unfortunately the support for h264 is limited to sccp to sccp calls, there is no support for it with h323

Take a look at the system guide for 4.2(3) here:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e4ea.html

In the Video Codec section, you see:

"The system supports H.264 for calls that use skinny Client Control Protocol (SCCP) on originating and terminating endpoints only."

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: H264 support - CCM4.2

Anyone know if this is still the case with CUCM 6.1? Looking to do H264 between H323 and SCCP devices.

Cisco Employee

Re: H264 support - CCM4.2

Linux appliances do support h264 between h323 and sccp

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: H264 support - CCM4.2

By Linux you mean CUCM 6.1.1 should work?

I cannot seem to make it happen. Any suggestion on how to set it up?

313
Views
5
Helpful
4
Replies
CreatePlease to create content