Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

H320 legacy ISDN point-to-point devices over IP networks

What are the options to use my H320 legacy ISDN point-to-point devices

over an IP Network WAN link.

I just want this. What the options that I have ?

Tanks

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: H320 legacy ISDN point-to-point devices over IP networks

If you didn't get an answer you can try Cisco's terminal adpater.

F. Brown

4 REPLIES
Community Member

Re: H320 legacy ISDN point-to-point devices over IP networks

Did you by chance figure this one out yet?

Community Member

Re: H320 legacy ISDN point-to-point devices over IP networks

If you didn't get an answer you can try Cisco's terminal adpater.

F. Brown

Community Member

Re: H320 legacy ISDN point-to-point devices over IP networks

Note that Cisco has end-of life'd the IPVC 3530 VTA.

Community Member

Re: H320 legacy ISDN point-to-point devices over IP networks

Most newer VC systems support both H.323 and H.320 interfaces. If you have an older system that support only H.320, it is recommended to get a new codec that supports both protocols if possible. The cost/complexity of adapters/gateways ( ~$4k) for this function is about as much as a new codec in many cases

229
Views
0
Helpful
4
Replies
CreatePlease to create content