Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

h323 and nat

hi all ,

i'm performing h323 video conf with polycom solution (PVX and Ipower)(one endpoint on private lan one endpoint on internet)

between ipower and pvx all works fine ,between pvx and pvx video works but i can't use h239 PVX option.

it looks like a nat issue does anybody still experience that ??

Is H239 well supported by nat ??

Thanks

2 REPLIES
Silver

Re: h323 and nat

I think H.239 was introduced in H.323v5, and certainly the PIX only supports H.323v4. H.239 (Dual Video) is not supported on an IP-IP Gateway yet either.

New Member

Re: h323 and nat

thanks for answering ,

i made some etherreal capture and when h239 is activated on pvx the ios firewall (nat) is enable to locate the ip adress in payload

(all works fine if h239 isn't activared)

So the pvx sends its video stream to private ip address.

H239 isn't supported by nat on 12.4(2)T advanced ip

171
Views
0
Helpful
2
Replies