Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

How to change a 3750G port from 4Q3T to 1P3Q3T queueing?

On page 5-10 of the Cisco Telepresence Network Systems 2.0 Design Guide it states:

"The C3560G/3750G/E supports either 4Q3T or 1P3Q3T egress queueing configurations...it is recommended to enable 1P3Q3T egress queueing configuration, with Q1 as the PQ."

In my C3750G I do a 'show int g1/0/7 capabilities' and get this output concerning the queues:

  QoS scheduling:        rx-(not configurable on per port basis),
                                  tx-(4q3t) (3t: Two configurable values and one fixed.)

The switch is running 12.2(58)SE2

How does one change the queue structure from 4Q3T to 1P3Q3T?

1 ACCEPTED SOLUTION

Accepted Solutions

How to change a 3750G port from 4Q3T to 1P3Q3T queueing?

Hi,

You can take a look at this document:

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html#wp1099352

Hope this helps, please rate if it does.

Kind regards,

- Adrian.

2 REPLIES

How to change a 3750G port from 4Q3T to 1P3Q3T queueing?

Hi,

You can take a look at this document:

http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND_40/QoSCampus_40.html#wp1099352

Hope this helps, please rate if it does.

Kind regards,

- Adrian.

Community Member

How to change a 3750G port from 4Q3T to 1P3Q3T queueing?

Perfect! - Thanks

1709
Views
0
Helpful
2
Replies
CreatePlease to create content