10-19-2006 10:24 AM - edited 03-17-2019 08:49 PM
I want to disallow my users from changing the DHCP server IP address stored in the IP Telephone instrument. I read in Cisco documentation that an user can type **# and then access the DHCP server IP address settings and change it as well. Is this possible? Or, is the DHCP server IP address parameter setting modifiable only in the CCM?
Solved! Go to Solution.
10-20-2006 08:57 AM
I don't think you can change the DHCP server address. You can, however, change the IP address, TFTP server address, etc. You can disable access to settings on a per phone basis by going to phone configuration in CCM admin and changing the Settings Access field to Disabled. This can also be done in bulk using BAT.
Hope this helps. If so, please rate the post.
Brandon
10-20-2006 08:57 AM
I don't think you can change the DHCP server address. You can, however, change the IP address, TFTP server address, etc. You can disable access to settings on a per phone basis by going to phone configuration in CCM admin and changing the Settings Access field to Disabled. This can also be done in bulk using BAT.
Hope this helps. If so, please rate the post.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide