Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

How to get back to initial CUCM 7.x/8.x

Hi, experts

After configuring CUCM7.x/8.x, I want to quickly remove all configurations for getting back to initial status. Could you let me know if there is a way to delete some files in the system by administrator or root account? Thanks for any help.

Perry

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: How to get back to initial CUCM 7.x/8.x

No problem.

Please rate helpful posts and mark answered questions that you've got a satisfactory response from to help identify useful content in the forums...
https://supportforums.cisco.com/docs/DOC-6212

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
3 REPLIES
Super Bronze

Re: How to get back to initial CUCM 7.x/8.x

Hi


The only 'quick' way to a blank system would be to restore a backup taken when you first built the CCM from media and before configuring anything.

Once you have made configs; you can manually delete things via the GUI, or rebuild from media.

Even with root access you can't just go in and delete things - for example, 90% of what CCM is about is in the DB, you can't just delete the DB, you need the contents of it from the default build.

Regards

Aaron

Please rate helpful posts..

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Cisco Employee

Re: How to get back to initial CUCM 7.x/8.x

That is a good way. Thank you for your answer, Aaron.

Super Bronze

Re: How to get back to initial CUCM 7.x/8.x

No problem.

Please rate helpful posts and mark answered questions that you've got a satisfactory response from to help identify useful content in the forums...
https://supportforums.cisco.com/docs/DOC-6212

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
411
Views
0
Helpful
3
Replies
CreatePlease to create content