i'm not sure this is the correct forum but any help it's welcome.
I have a 857 router ios 12.4(4)T with no acl, and no firewall configured, i need to apple ichat for video but all the time i get no response from my client. Apple says this:
"Network address translation (NAT) is a popular method for sharing an Internet connection on small networks. Airport base stations and many other household routers have the option of using NAT. In many cases, NAT is the default setting. iChat can establish audio and video connections over NAT, which may allow iChat to succeed where similar teleconference applications cannot."
i'm using only 1 external ip address share thru NAT
I have the same problem on my Cisco 831 running ios 12.4(5a). iChat reports "Can't get video from the camera." but only when going through the router. I've opened up the recommended ports and have even tried having no filtering ("permit udp any any" "permit tcp any any") but no dice.
I knew that NAT had nothing to do with it and was banging my head trying to figure out how to disable SIP, which seems weird that Cisco would hardcode that entry in these days with VOIP... Thanks again for the tip, hope it works, will please many many people in the office and reduce using Skype... thnx again.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...