Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Integrating CUCM7.x with Polycom RMX2000

I fornd a tread that talked to integrating an older Call Manager 4.x with an older Polycom RMX.

I am looking for some guidance in answering if I can use an RMX2000 as a Video/audio MCU for doing video conferencing between a bunch of cisco phones with CUVA installed on the PC with Cisco Camera II's?  and also be able to maybe add in a larger Polycom HDX7000 or Cisco Telepresence 1100 unit?

Thanks

Everyone's tags (3)
3 REPLIES
New Member

Re: Integrating CUCM7.x with Polycom RMX2000

I have had no issue with the VTA and the polycom rmx2000 but I am having issues with the 9971 phone with a camera.  I get full audio with no issues but the phone shows a black screen and the rmx2000 states that the video protocol is not compatible.  Do you have any suggestions?

Thanks,

Joe

New Member

Re: Integrating CUCM7.x with Polycom RMX2000

Joeharb/Richard,

Were you able to integrate the RMX with the CUCM? I have not been able to do it and would value any guidance you can provide?

Thanks,

AA

New Member

Configure it as an ICT Trunk

Configure it as an ICT Trunk pointing to RMX2000, it will works great! :)

1514
Views
0
Helpful
3
Replies