Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Intercluster communications

Hello,

I've configured two CM clusters and they are able to reach each other via inter-cluster trunk (no gatekeeper control). Both clusters have their own separate Unity servers. Only cluster 1 has a POTS connection, cluster 2 is able to dial out of the pots connection via the intercluster trunk. My question is; when someone dials in to the autoattendant on cluster 1 and wants to reach someone on cluster 2, how does the Unity server on cluster 1 need to be set up so that it can build connections to phones on cluster 2?

-Shikamaru

2 REPLIES
Silver

Re: Intercluster communications

In large systems, you might have to configure more than one cluster to handle the call processing load.Refer URL

http://cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00800c4ca9.html#xtocid4

Community Member

Re: Intercluster communications

Please do not make obscure or irrelevant posts. If I've gone through the trouble of building an intercluster trunk and configured a dial-plan for it, it stands to reason that I know full well the issue of call-processing.

-Shikamaru

512
Views
1
Helpful
2
Replies
CreatePlease to create content