Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

International Dialing 12 digits does not work

International dialing of 12 digits or more do not go through. 10 and 11 digits work fine. Callmanager 4.1(3), H323 2811 gateway IOS 12.3-14T7, using 7.011! dial pattern

3 REPLIES
Blue

Re: International Dialing 12 digits does not work

Assuming this is a PRI you will want to look at the ISDN Plan and Type that is being sent with the calls. A debug ISDN Q931 will provide this info. This will also confirm you are sending the correct digits.

Many carriers want to see Unknown or National if you are also sending 011. Call Manager will set this to International if you match on the @ macro. You can test this by setting up an explicit route pattern for a test.

Please rate helpful posts.

New Member

Re: International Dialing 12 digits does not work

When you say the @macro do you mean in the dial pattern 7.011@, I am using 7.011!. That is the problem, the carrier is seeing international, the need to see unknown, which they are on 10 and 11 digit dialing but on 12 digit they see international. How do I change that?

New Member

Re: International Dialing 12 digits does not work

What you need to do is to translate the 12 digit number to an unknown number plan. This needs to be done on the IOS router acting as the H.323 gateway

Refer to this documentation:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Hope this helps.

133
Views
5
Helpful
3
Replies
CreatePlease to create content