Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Interworking Altigen PBX with Cisco

Hello ,

Has anyone worked on getting a Altigen Alt Office 2 to interwork with the

cisco NMHDV12 Card.

Does the DNIS info get sent to the line if the controller is configured to

accept the line as a T1 or should it be a ISDN PRI T1 Interface.

I cant even get the card to talk to cisco.

The line does not even come up

Any help regarding this is greatly welcome

If any of you have doen this andhave a cheat sheet, it would be great if you can share it with me

Thanks

Madhu

  • Video Over IP
1 REPLY
Cisco Employee

Re: Interworking Altigen PBX with Cisco

You will need to find out what type of signaling the altigen is doing on the T1, is it CAS or ISDN(PRI)? If cas, is it e&m or loop-start, if PRI what switch type.

Once you know this, configure the cisco gateway to match what the altigen is doing.

http://www.cisco.com/warp/public/788/signalling/signalling.shtml

437
Views
0
Helpful
1
Replies
This widget could not be displayed.