We have defined two local zones. The internal zone allows only to register from an private network. The other zone allows to register clients from all other zone. The gatekeeper is accessible through static nat from the outside.
Netmeeting clients from the different networks are registered in the right zone. Clients in the same zone can talk eachother. If we try to connect to an user in the other zone, we get a message that the specified user is not registerd in any zone.
Our question: How can users from one zone see other users in the other zone, and how can they connect ? Should the h323-id of the client have a suffix like the zone name?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...