Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IP Communicator with VT Adv 2.0

I have installed VTA 2.0 in a machine with IPC 2.0.

The VTA recognizes the camera but not the IPC.

What?s is the problem?

Do I need to do something?

Thanks

6 REPLIES
New Member

Re: IP Communicator with VT Adv 2.0

(1) Make sure that VTA is looking for CDP packets from IPC and not from an ethernet-attached hard phone (there is a graphic where you can connect the line from the camera to IPC or a hard phone)

(2) Make sure you do not have a firewall that could be gobbling up the packets.

New Member

Re: IP Communicator with VT Adv 2.0

Hi, Kenneth.

I found out a documentation saying that the minumal version to implement this is 4.1(3)SR1. My version was 4.1(3). I did the upgrade and the solution worked fine.

Thanks.

New Member

Re: IP Communicator with VT Adv 2.0

hi Rodrigo,

I have problems with the configuration between VT Advantage and Ip Communicator.

The camera not recognized the ipcommunicator.

Can you help me?

New Member

Re: IP Communicator with VT Adv 2.0

Hi,

try to confirm that Video Capability is enable in CallManager configuration for the IP Communicator.

I am using IP Communicator with VT Advantage, 2.0 without any problem.

New Member

Re: IP Communicator with VT Adv 2.0

I search this option in the CCM but not find it on the IPC only can view this option for IP Phones.

I have the CCM 4.0(2a)sr1a. This version support VT Advantage 2.0 with IPC???

Thanks,

New Member

Re: IP Communicator with VT Adv 2.0

Per VT Advantage 2.0 release notes at http://www.cisco.com/en/US/products/sw/voicesw/ps5662/prod_release_note09186a00806cbe7d.html , VT advantage 2.0 requires at least CallManager Version 4.1(3), Service Release 1 to work with Cisco IP Communicator.

If this answers your question, please rate this response.

Thanks,

Neal

150
Views
0
Helpful
6
Replies