According to Video IP Telephony SRND,MCU can be configured as SCCP device on CCM 4.1x,in order to have CUVA video conference to outside H320 gateway, we still need configure H.320 gateway as a H323 gateway in CallManager, and then create the dummy RASAggregator trunk in CCM. Is it right?
Or can someone explain it in a little detail when MCU as SCCP device, CUVA tries to have a conference with H323 client outside H320 gateway?
On Call Manager 4.0, which does not support H.264, the call falls back to H.263. On all other CCM versions, CUVA gives preference to H.264 video whenever possible, if the other endpoint also supports H.264.Otherwise the call defaults to H.263.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...