IPVC GW2P: Caller get "vxtarget" information in replacement of the ISDN num
On the Gw version 184.108.40.206.5, when a endpoint or a Cisco MCU MC06 call an ISDN number, the endpoint or the MCU get on the display (in replacement of the isdn number) the information " vxTarget". How can we configure it to keep the isdn number on the display ?
Hardware : Cisco IPVC Gateway GW2P version 220.127.116.11.5
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...