Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IPVC PRI Module All B-Channels used for single call

I am using an IPVC 3545 with a PRI module. When calling into the PRI Mod, I can check status and all 23 B channels are in use for a single call.

If I place a call to the outside through the PRI Mod, the correct channels are used.

Pleas advise.

1 REPLY
Silver

Re: IPVC PRI Module All B-Channels used for single call

Check for Configuring ISDN Channel Bonding Settings for Downspeeding .

The default setting for PRI gateways is 30, means all channels will be used if its selected.

You can adjust the number of channels required.

http://www.cisco.com/en/US/products/hw/video/ps1870/products_administration_guide_chapter09186a00804cc05b.html#wp1041941

121
Views
0
Helpful
1
Replies
CreatePlease login to create content