02-11-2009 02:00 PM - edited 03-17-2019 09:38 PM
We have CCM V4.2 and Cisco voice gateways-Cat6k version 12.4
Is it possible to block incoming calls by caller ID on voice gateways or CCMs?
Solved! Go to Solution.
02-11-2009 04:18 PM
Hi Jessica,
This is possible if the Gateway uses H.323, there is no way using MGCP :(
Here are some great answers!
Mahesh @ Cisco
TAC Case from Jorge
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K15182736
Another good related thread (answers from both Mahesh and Jorge)
Hope this helps!
Rob
02-11-2009 04:18 PM
Hi Jessica,
This is possible if the Gateway uses H.323, there is no way using MGCP :(
Here are some great answers!
Mahesh @ Cisco
TAC Case from Jorge
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K15182736
Another good related thread (answers from both Mahesh and Jorge)
Hope this helps!
Rob
02-11-2009 04:51 PM
As an addendum to this post (good post Rob), it should be noted that this is also valid with SIP. I think some of these were written before SIP really hit it's prime so it was not included.
-nick
02-12-2009 05:43 AM
Hi Nick,
Thanks for filling in the blanks here :) Your participation here is most valued and your willingness to share your knowledge is just great. +5 points for this my friend!
Cheers!
Rob
02-11-2009 04:56 PM
Rob -
You are always the best. Thank you so much.
Regards,
Jessica Wang
02-12-2009 05:44 AM
Hi Jessica,
Thanks so much for your extremely kind words :) It's always a pleasure dealing with such nice people, like yourself!
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide