Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is there a command that can open & close a dialpeer on a specified time

Is there a command that can open & close a dialpeer on a specified time on a router

2 REPLIES

Re: Is there a command that can open & close a dialpeer on a spe

In Callmanager Express and SRST, you can block certain patterns and therefore certain dial peers based on time of day, day of week, and date. See the following links.

Callmanager Express

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide_chapter09186a00802d23e0.html

SRST

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a0080392682.html

You can accomplish this with Callmanager by using Time of Day Routing. See the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edbaa.html

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: Is there a command that can open & close a dialpeer on a spe

Brandon,

First, thank you so much for a quick responds

we dont use Cisco call manager s/w for our Cisco 3745 Router (with VoIP & not a TDM network) c3745-js2-mz.123-6c IOS used as a softswitch, Is there a way we could do this with a existing version to open & close for a specific dialpeer on specific hour, thank you in advance

166
Views
0
Helpful
2
Replies