Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LLQ for Video

I used the next URL for VoIP with LLQ

It works

But I can use the same configuration and add Videoconference Over IP Over Frame Relay link.

Cisco Employee

Re: LLQ for Video

Yes you can use the same configuration, but mark the traffic with IP Prec4, See the example below. The example below is from a test bed on a frame relay link supporting a single 348k video call.

class-map Video-Conf

match access-group 102


policy-map QoS-Policy

class Video-Conf

priority 450 30000

class class-default



Video-Conf Traffic

access-list 102 permit ip host any dscp af41

New Member

Re: LLQ for Video

Hi i have polycom terminal and they can mark the traffic with IP PREC4. In the configuration of access list i Can to use

access-list 180 permit ip any any precedence flash-override

for indicate ip prcec traffic. I like to use dcsp but only my VS-4000 support that and my viewstation and iPower it is not support onlyt ip prec

CreatePlease login to create content