Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MC3810 Caller ID. FXO ports

Hi i'm trying to get Caller ID working on an FXO port on a MC3810. I've found on Cisco that the Version of the FXO-UK card must be 03.XX or later. I have 03.A0 an still can't configure it. Am i missing anything?

Here is the Sh ver from the 3810.

Router uptime is 11 minutes

System returned to ROM by reload

System image file is "flash:mc3810-a2jsv5-mz.122-15.T17.bin"

Last reload reason: Reload command

cisco MC3810 (MPC860) processor (revision 06.07) with 61440K/4096K bytes of memo

ry.

Processor board ID 10780661

PPC860 PowerQUICC, partnum 0x0000, version A03(0x0013)

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

MC3810 SCB board (v05.A0)

1 Six-Slot Analog Voice Module (v03.K0)

1 Analog E&M voice interface (v03.K0) port 1/1

1 Analog E&M voice interface (v03.K0) port 1/2

1 Analog E&M voice interface (v03.K0) port 1/3

1 Analog FXO-UK voice interface (v03.A0) port 1/5

1 Analog FXO-UK voice interface (v03.A0) port 1/6

1 6-DSP(slot2) Voice Compression Module(v01.K0)

1 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

2 Serial(sync/async) network interface(s)

256K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (INTEL28F016)

Configuration register is 0x2102

1 REPLY
New Member

Re: MC3810 Caller ID. FXO ports

FXO CID works on H.323 and not MGCP... maybe thats the problem?

121
Views
0
Helpful
1
Replies