Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

MCU 3510. Configure SCCP and CCM on the MCU3510

How I can configure the SCCP protocol and add the Cisco Call Manager (TFTP Server) to MCU 3510?

2 REPLIES
Cisco Employee

Re: MCU 3510. Configure SCCP and CCM on the MCU3510

New Member

Re: MCU 3510. Configure SCCP and CCM on the MCU3510

Mowuor, the configuration of the MCU 3510 is very different, to configure the MCU 3510 is necessary install the Cisco IPVC Tools and run Cisco IPVC Configuration Utility, and in this aplication, i don't see the options to configure the IP address of the TFTP (cisco call manager) and the option to configure the SCCP protocol.

Without this parameter o configuration, How can the Call Manager register the MCU? If both, Cisco Call Manager and the MCU, needs this information ?. In the cisco call manager I add the MAC address of the MCU in the conference type 35XX, and this conference bridge no appear registered ?

Or the MCU 3510 use other protocols to register to Cisco Call Manager?

???

255
Views
0
Helpful
2
Replies
CreatePlease to create content