Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MCU 3515 Integration with CUCM 5.1

Hello, I have a MCU 3515 and a Cisco Callmanager v5.1. I am trying to register the MCU on my callmanager adding the mcu as a conference bridge, I have setting the tftp and callmanager using the MCU web interface but the CFB is in status unknow in the callmanager. I need help to know why the MCU CFB is not registered in the callmanager.

Thanks,

1 REPLY
Bronze

Re: MCU 3515 Integration with CUCM 5.1

To set up the Cisco Unified Videoconferencing 3515 MCU to use Cisco Unified CallManager which uses the Skinny Client Control Protocol (SCCP), you must enable the MCU to support SCCP.

http://www.cisco.com/en/US/docs/video/cuvc/release_5_1/mcu/3515/administration/guide/Protocols.html#wp2915457

218
Views
0
Helpful
1
Replies