Can you let me know if you can have a mixed mode Video conference i.e H323, SIP and SCCP. I know you can dial into a MCU using a "Meet Me" set up but can a H323, SIP device conference, set up a conference in a SCCP end point and vice versa. A call starts as a point to point but then you want to conference another party - H323/SIP or SCCP Can you do this with a single MCU set up as a H323/SIP or SCCP mode.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...