Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MCU

How I can add the MCU 3545 to Cisco Call Manager version 5, for Videoconferencing?

1 REPLY
Bronze

Re: MCU

If your MCU module is installed in the top slot of the Cisco Unified Videoconferencing 3545 chassis, then the module also performs PCI bus functions for the chassis. In the MCU interface, you can use the System section to monitor chassis functions remotely.

One of the functions the chassis performs is to monitor ambient temperature. You can set temperature thresholds in the System section. The chassis uses these thresholds to trigger a warning that the ambient temperature exceeds specification and when the temperature has returned to five degrees below the warning threshold.

http://www.cisco.com/en/US/docs/video/cuvc/5_5/mcu/3545/configuration/guide/intro_gui_5_5.html#wp1112850

163
Views
0
Helpful
1
Replies