Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

MeetMe time limit

We have a MeetMe call setup for a group that needs to do a con-call but no one will be at the office to initiate it. So they asked us to setup a MeetMe before 16 hours before the con-call is suppose to happen. We tried this before but the conference got dropped. Note, what we did was setup the MeetMe con-call then put the hold on hold so that it doesn't drop the call. Is there a limit on how long a MeetMe will stay up?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: MeetMe time limit

Hi Ming,

You are probably hitting these two CUCM Service Parameter Config which will control how long this will stay up;

Clusterwide Parameters (Feature - General)

Maximum Call Duration Timer :

This parameter specifies the minutes that a call can remain active before Cisco CallManager clears it. A value of zero disables the timer.

This is a required field.

Default: 720.

Unit: min.

Minimum: 0.

Maximum: 35791.

Maximum Hold Duration Timer :

This parameter specifies the minutes that one or both parties on a call can remain on hold before Cisco CallManager clears the call. A value of zero disables the timer.

This is a required field.

Default: 360.

Unit: min.

Minimum: 0.

Maximum: 35791.

Hope this helps!

Rob

2 REPLIES
Hall of Fame Super Red

Re: MeetMe time limit

Hi Ming,

You are probably hitting these two CUCM Service Parameter Config which will control how long this will stay up;

Clusterwide Parameters (Feature - General)

Maximum Call Duration Timer :

This parameter specifies the minutes that a call can remain active before Cisco CallManager clears it. A value of zero disables the timer.

This is a required field.

Default: 720.

Unit: min.

Minimum: 0.

Maximum: 35791.

Maximum Hold Duration Timer :

This parameter specifies the minutes that one or both parties on a call can remain on hold before Cisco CallManager clears the call. A value of zero disables the timer.

This is a required field.

Default: 360.

Unit: min.

Minimum: 0.

Maximum: 35791.

Hope this helps!

Rob

Community Member

MeetMe time limit

Hi,

The above requirement of starting the MeetMe conference through an external phone(PSTN) along with authentication,limit of users per conference and scheduleing feature IS POSSIBLE through an application and we have done it.

Since the conference can be started through an PSTN phone it will not be required to start the the conference much earlier nor it will be required to change the Maximum Call Duration Timer in CCM

577
Views
10
Helpful
2
Replies
CreatePlease to create content