Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

MSTAT Output

I have the following MSTAT output. Looking at the -2391/0 = --% statistic, is this indicative of an error? Does anyone have an explanation of it?

mstat 10.65.53.10 10.65.63.114 239.195.0.8

Type escape sequence to abort.

Mtrace from 10.65.53.10 to 10.65.63.114 via group 239.195.0.8

From source (nhq1--coap01brd.amfam.com) to destination (desperado.amfam.com)

Waiting to accumulate statistics......

Results after 10 seconds:

Source Response Dest Packet Statistics For Only For Traffic

10.65.53.10 10.255.21.57 All Multicast Traffic From 10.65.53.10

| __/ rtt 3 ms Lost/Sent = Pct Rate To 239.195.0.8

v / hop 3 ms --------------------- --------------------

10.65.53.2

10.255.21.249 nhq-epms-sn-2-4-1.amfam.com

| ^ ttl 0

v | hop -1 ms -3/0 = --% 0 pps 0/0 = --% 0 pps

10.255.21.250

10.255.21.58 nhq-core2-3-5.amfam.com

| ^ ttl 1

v | hop 0 ms -2391/0 = --% 0 pps 0/0 = --% 0 pps

10.255.21.57

10.65.63.3 nhq-b-o-v162.amfam.com

| \__ ttl 2

v \ hop 0 ms 2395 239 pps 0 0 pps

10.65.63.114 10.255.21.57

Receiver Query Source

2 REPLIES
Bronze

Re: MSTAT Output

Community Member

Re: MSTAT Output

I looked at the suggested link but I couldn't find any detailed info to line by line of the mstat output. Can anyone direct or explain what each line means? thanks.

683
Views
0
Helpful
2
Replies
CreatePlease to create content