In my company we are working in a new IP Telephony solution. This solution includes CUCM enterprise for 1.100 users, two MX200 endpoints and two 2911 gateways. The client wants to include multiconference sessions between Video telephones (8941 included), jabber and the MX200 also with the share content option. How do I can to enable this requirement with this CUCM+2911 solution? what is the required PVDM? is it possible to share content under this configuration?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...