we have configure 5400 as SIP gateway using PRI E1 as POTS leg and CCM as VOIP leg , and every thing is operating well but when i dial to particular mobile which is enablin music ring back , i don't hear the music tone just i hear the standard ring tone , while from other mgcp gateway endpoint i heard the ring back music well , do i need other additional configurations on my SIP gateway to hear music or what ??
When the IPT user starts the transfer, the caller hears hold music from the Call Manager while the IPT user hears queue music from CVP (the gateway). No MTP required.If you put the MTP on the SIP trunk to the SIP Proxy server, the caller will now hear queue music from CVP.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...