Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NM-2CE1T1_PRI support for voice

Hi we are trying to use 2811 for inbound voice calls. We have NM-2CE1T1_PRI Port adapter terminated on slot 1. We have configured card type e1 1 command. Now the problem is that after configuring "pri-group timeslots 1-31", i am not getting the voice port for this controller.

Thanks in advance.....

1 REPLY
New Member

Re: NM-2CE1T1_PRI support for voice

Hello  Amir

From the Deployment i saw , the NM-2CE1T1 PRI interface is used to Data , ISDN Dialer  and a not Voice-enabled PRI channalized E1/T1 . Please referr to the Cisco Documentation for NM-2CE1T1-PRI ...

This link is a good start :http://www.cisco.com/en/US/docs/ios/12_3/feature/guide/gt_et2sw.html#wp1027188

thanks

417
Views
0
Helpful
1
Replies