Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NTP Issue

Hello,

We have a issue where NTP has stopped working on our internal VCS Control, we do not have a internal NTP server so we use the public servers:

0.uk.pool.ntp.org, 0.europe.pool.ntp.org etc

These addresses always worked and no matter what public address we try they all fail with the same response as attached, I have also gathered the following output from our SSH session.

Any ideas would be appreciated!

1 REPLY
New Member

Re: NTP Issue

check the stratum value. It might bee to high. Try configuring the NTP server which has stratum less than 5 and check. If possible, configure one on LAN and check.

http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a0080117070.shtml#ntparch

Please rate all useful posts

630
Views
0
Helpful
1
Replies
CreatePlease to create content