Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Point to point Bandwidth

dear sir

I am using Pont to point microsoft base VPN and using CCME on both side , i wanna know how much bandwidth will be used for 1 voice call from side A to side B with VPN ? and can i register Ip Phone From side A to Side B using CCME ?

I m currenly using 64 K link.

Your assistance will be hihgly appreciatable.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Point to point Bandwidth

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.

Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.

If the VPN is passing all the traffic OK, you can register phones across the link without problems.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: Point to point Bandwidth

A regular g.711 call takes almost 90 Kbps plus the VPN overhead.

Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.

If the VPN is passing all the traffic OK, you can register phones across the link without problems.

Hope this helps, please rate post if it does!

121
Views
0
Helpful
1
Replies
CreatePlease to create content