I have a CCM version 6, a MCU 3515, Gatekeeper and three Polycom VSX7000. I've registered the MCU 3515 as MCU in the Gatekeeper and the Polycoms Station as terminals in the Gatekeeper. The video call work beetween in the Polymcom Video Endpoints, but beetween a Cisco 7960 with VT Advantage only voice call is established.
I've registered the Polycom Station as H.323 client in the Cisco Call Manager and I've added the MCU as conference bridge and this assigned to media resource group. The call from the 7960 with VT Advantage to Polycom VSX7000 work and the VideoConference works between the three Polycom Station and four 7960 with VT Advanatage, but this only work only if the videoconference is started from the Cisco Phone. If a Polycom Video Endpoint call to Cisco Phone only voice call is established, How can I solve this?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...