Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

polycom vsx 800 timeout on pix

Hi,

Have a polycom vsx 8000 behind a pix firewall running 7.2 the quality is fine,but after 60 minutes (exactly) the call will drop. We are using dynamic ports on the polycom. Does anyone have an idea on what we can do to extend the call length?

Thanks for your help.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: polycom vsx 800 timeout on pix

There was a discussion of this issue on the VTCTALK form at http://www.vtctalk.com//showthread.php?t=11450.

"timeout value in the PIX firewall that was causing the calls to drop. It was the H225 timeout"

check it out to see if it relates to your symptom.

2 REPLIES

Re: polycom vsx 800 timeout on pix

There was a discussion of this issue on the VTCTALK form at http://www.vtctalk.com//showthread.php?t=11450.

"timeout value in the PIX firewall that was causing the calls to drop. It was the H225 timeout"

check it out to see if it relates to your symptom.

New Member

Re: polycom vsx 800 timeout on pix

Yep we changed this yesterday (it was the only value set to an hour) and that fixed the problem. Thank you for responding.

523
Views
0
Helpful
2
Replies