Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Prefix Digits Translation ??

Hi,

I have CallManager 5.X, with Gateway in H323 mode, an access PRI.

I will add BRI card on this router, more than I will add 10 users in CallManager, I want that the calls external of these users uses just new BRI Card.

These users have Partitions and CSS specific, different to those which I use for the other users.

Therefore, it’s to forward the calls of this group to BRI Card.

Thank you for your Help.

Best Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Prefix Digits Translation ??

Hi

The gateway will automatically remove matched digits from the destination-pattern string. For example:

If you send '91234' to the gateway, and the dial peer is:

dial-peer voice x

destination-pattern 9T

port 0/0/0:15

The number sent to the PSTN port will be 1234

In your example:

On the CCM:

Route pattern : 30537XXXXXX

Partition : (partition dedicated has this new group)

Gateway : the H323 Gateway

on the GW:

Dial-peer voice XX pots

Destination pattern 30537XXXXXX

If you send 3057xxxxxx to this dial-peer, the the number sent to the PSTN will be XXXXXX.

If you want to send 057XXXXXX to the pstn you could add:

forward-digits 9               (to send 9 digits in total to the PSTN)

or

prefix 057                         (to insert 057 before the xxxxxx)

Regards

Aaron

Please rate helpful posts....

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
6 REPLIES
Hall of Fame Super Gold

Re: Prefix Digits Translation ??

Just prefix some digits on CM, and build the  pots DB with these digits, going to a trunk-group of BRIs.

New Member

Re: Prefix Digits Translation ??

Thank you for your answer,

The problem it's that I have already route patterns, which match the same destination, and considering Gateway is in H323 mode, the CCM send the call towards Gateway, and in this moment, the calls of this new group can uses the PRI Card, and it is what it is necessary to avoid.

My question, it's how to remove a digit of Gateway?? for example,
My need is match 0537XXXXXX, and for differentiated from the existing route  pattern  (which uses PRI) that it with the same destination, I will make:

On the CCM:

Route pattern : 30537XXXXXX

Partition : (partition dedicated has this new group)

Gateway : the H323 Gateway

on the GW:

Dial-peer voice XX pots

Destination pattern 30537XXXXXX

????????????????????????

thank you for your help.

Regards

Hall of Fame Super Gold

Re: Prefix Digits Translation ??

You need to put the new users in a different CSS partion. They will be able to use only a new

router pattern that has the special prefix. That is normally removed by matched digits of pots DP.

Only if oyu are unable to do the above, it is possible to do some addtional configuration on the GW only.

New Member

Re: Prefix Digits Translation ??

Thank you,

If possible, I want to know, what I will add to the configuration of the DP in the Gateway to remove the 1st digit.

Regards

Super Bronze

Re: Prefix Digits Translation ??

Hi

The gateway will automatically remove matched digits from the destination-pattern string. For example:

If you send '91234' to the gateway, and the dial peer is:

dial-peer voice x

destination-pattern 9T

port 0/0/0:15

The number sent to the PSTN port will be 1234

In your example:

On the CCM:

Route pattern : 30537XXXXXX

Partition : (partition dedicated has this new group)

Gateway : the H323 Gateway

on the GW:

Dial-peer voice XX pots

Destination pattern 30537XXXXXX

If you send 3057xxxxxx to this dial-peer, the the number sent to the PSTN will be XXXXXX.

If you want to send 057XXXXXX to the pstn you could add:

forward-digits 9               (to send 9 digits in total to the PSTN)

or

prefix 057                         (to insert 057 before the xxxxxx)

Regards

Aaron

Please rate helpful posts....

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Prefix Digits Translation ??

hi,

the problem is solved.

thank you for your help

Best Regards

590
Views
0
Helpful
6
Replies