Progress tone generation on AS5300

[admin_2]

I'm trying to set the AS5300 to return progress tones back to the PRI ports but aren't getting anywhere. Any ideas???

[irisrios]

There could be some issues with the PBX or the gateway to pass on the progress tones back to the source endpoints. Checkout the various scenarios for it and the way it can be handled at:

Troubleshooting No Busy Tone and No Announcement Messages on ISDN-VoIP (H.323) Calls

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a0080111b58.shtml

[#3]

Cracked it, many thanks for your help.

Daz