Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QoS applied to SUP32-GE-3B, but queueing doesn't change.

The 6509 with SUP-32-GE-3B (8 GE ports) is running IOS 12.2(33)SXH7.  I've applied this QoS config to a couple of the supervicor GE ports that we use for uplinks:

interface GigabitEthernet5/1

description to Po1 ANB-RS6509-DU-C

no ip address

wrr-queue bandwidth 5 50 45

priority-queue queue-limit 30

wrr-queue queue-limit 5 40 25

wrr-queue random-detect min-threshold 1 80 100 100 100 100 100 100 100

wrr-queue random-detect min-threshold 2 80 100 100 100 100 100 100 100

wrr-queue random-detect min-threshold 3 60 70 80 90 100 100 100 100

wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100

wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100

wrr-queue random-detect max-threshold 3 70 80 90 100 100 100 100 100

wrr-queue cos-map 1 1 1

wrr-queue cos-map 2 1 0

wrr-queue cos-map 3 1 2

wrr-queue cos-map 3 2 3

wrr-queue cos-map 3 3 6

wrr-queue cos-map 3 4 7

priority-queue cos-map 1 4 5

mls qos trust dscp

channel-group 1 mode desirable

end

But when I do a 'show queueing int' there isn't any change from the default, as can be seen by the queue tail-drop-thresholds and queue thresh cos-map:

ANB-RS6509-AU-E200#sh queueing int g5/1

Interface GigabitEthernet5/1 queueing strategy:  Weighted Round-Robin

  QoS is disabled globally

  Port is untrusted

  Extend trust state: not trusted [COS = 0]

  Default COS is 0

    Queueing Mode In Tx direction: mode-cos

    Transmit queues [type = 1p3q8t]:

    Queue Id    Scheduling  Num of thresholds

    -----------------------------------------

       01         WRR                 08

       02         WRR                 08

       03         WRR                 08

       04         Priority            01

    WRR bandwidth ratios:  100[queue 1]   0[queue 2]   0[queue 3]

    queue-limit ratios:    100[queue 1]   0[queue 2]   0[queue 3]   0[Pri Queue]

    queue tail-drop-thresholds

    --------------------------

    1     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    2     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    3     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-min-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      3    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-max-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      3    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    WRED disabled queues:      1  2  3

    queue thresh cos-map

    ---------------------------------------

    1     1      0 1 2 3 4 5 6 7

    1     2     

    1     3     

    1     4     

    1     5     

    1     6     

    1     7     

    1     8     

    2     1     

    2     2     

    2     3     

    2     4     

    2     5     

    2     6     

    2     7     

    2     8     

    3     1     

    3     2     

    3     3     

    3     4     

    3     5     

    3     6     

    3     7     

    3     8     

    4     1     

    Queueing Mode In Rx direction: mode-cos

    Receive queues [type = 2q8t]:

    Queue Id    Scheduling  Num of thresholds

    -----------------------------------------

       01         WRR                 08

       02         WRR                 08

    WRR bandwidth ratios:  100[queue 1]   0[queue 2]

    queue-limit ratios:    100[queue 1]   0[queue 2]

    queue tail-drop-thresholds

    --------------------------

    1     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    2     100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-min-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    queue random-detect-max-thresholds

    ----------------------------------

      1    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

      2    100[1] 100[2] 100[3] 100[4] 100[5] 100[6] 100[7] 100[8]

    WRED disabled queues:      1  2

    queue thresh cos-map

    ---------------------------------------

    1     1      0 1 2 3 4 5 6 7

    1     2     

    1     3     

    1     4     

    1     5     

    1     6     

    1     7     

    1     8     

    2     1     

    2     2     

    2     3     

    2     4     

    2     5     

    2     6     

    2     7     

    2     8     

  Packets dropped on Transmit:

    BPDU packets:  0

    queue              dropped  [cos-map]

    ---------------------------------------------

    1                        0  [0 1 2 3 4 5 6 7 ]

    2                        0  []

    3                        0  []

    4                        0  []

  Packets dropped on Receive:

    BPDU packets:  0

    queue              dropped  [cos-map]

    ---------------------------------------------

    1                        0  [0 1 2 3 4 5 6 7 ]

    2                        0  []

Any idea why?

Everyone's tags (3)
477
Views
0
Helpful
0
Replies