Two sites are connected with eachother at 2Mb banwidth. At both the sites I have 3640 routers. I need to send video files from one location to another location. My major traffic is video files. I want to implement QoS so that my video traffic can get maximum bandwidth/priority over others. How I will configure QoS for this purpose. kindly help me indetail I never implemented it earlier. Also tell me the which configuration commands will be used.
There are a lot of Cisco CCO documents on QoS on the Web. If you have a login you can take a look at these documents. Could you tell us what kind of protocol/program you use for transmitting/playing the video?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...