QoS default class with a bandwidth statement or not?
I'm putting together a 5-class QoS config for prioritizing Telepresence and VoIP to be configured on gig-ethernet interfaces in an ASR1001 WAN router. My question has to do with whether or not to use a bandwidth statement in the class class-default. From what I understand, class-default will use what ever bandwidth is remaining after the other classes. Is that correct?
The classes in the QoS config are as follows with two version of class-default:
Voice = 50mb
Telepresence = 50mb
Signaling = 5mb
Network control = 5mb
Class-default = remaining (or 800mb)
1. - without bandwidth statement in class-default
2. - with bandwidth statement in class-default
What would be the better way to configure class-default?
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...